Trusted Team

Local Professionals

Vapor barrier first · Copper-bronze metallic finish

Metallic Epoxy Basement Floor in Barrington, IL

A damp storage basement turned into a home office and lounge with a vapor-barrier primer and a rich copper-bronze metallic floor.

GET A FREE QUOTE

Moisture First, Color Second

What goes under a metallic floor?

Every below-grade slab pushes moisture upward, and this one pushed harder than most- the relative humidity probe read well past the limit a standard epoxy is built for. Coating over that reading is how basement floors end up with blisters and edges that lift within a year. We installed a 100% solids vapor-barrier primer across all 540 square feet first, and only then started building color on top of it.

Metallic was the right finish for this room because it stopped being a basement the day the office went in. There is no grout to scrub and no seam for dust to collect in, the surface takes a mop in minutes, and the pigment moves differently in every pour- the owners selected a rich copper and bronze metallic blend with warm amber veining after seeing sample boards in their own light rather than on a screen.

What they have now is a sealed floor over a slab that used to breathe damp air into the room. The musty smell went with the adhesive and the open concrete, and both the workmanship and the materials are covered in writing, because we know exactly what went down under that color.

Three Days Below Grade

Why the color went down last

Day 1, 8:00 a.m.- Tile and adhesive. The remaining vinyl tile came up by hand, and the cured adhesive under it came off with diamond tooling across all 540 square feet. Everything ran through a HEPA vacuum, since this one was inside the house rather than in a garage.

Day 1, 1:00 p.m.- Moisture test. Relative humidity probes went into the slab and read above the threshold for a standard epoxy, which settled the specification: vapor-barrier primer before anything else.

Day 2, 8:00 a.m.- Vapor barrier, then base. The 100% solids primer went down first, and the charcoal base coat followed once it had cured enough to take it.

Day 3, 9:00 a.m.- Metallic. The copper-bronze metallic pigment was poured, spread and then moved with a roller and air until the veining looked right. This is the step that cannot be rushed, and it is the reason the floor takes three days instead of two.

Day 3, 2:00 p.m.- Clear topcoat. Walk-on the next morning, furniture back in on the fourth day.

Call us

Looking for a Garage Floor Epoxy Company?

Contact our team of on-site specialists for all your needs

Secret Link